Standard CentriVap DNA Vacuum Concentrators

No additional components are required to begin processing.

Boiling Point Calculator

• Microprocessor-controlled programming for run time from 1 to 999 minutes, heat from OFF to HI (100° C) in one degree increments and heat time from 1 to 999 minutes. Memory stores 1 to 9 programs
• Control panel with RUN/STOP button, PREHEAT button, set point SELECT button, increase/decrease buttons, and 3 Quick-Start buttons
• LCD for display of program number, actual and set point temperature, heater time remaining, and run time remaining
• Quick-Stop System stops vacuum pump, opens valve to bleed air into the chamber and stops the rotor within seconds after time expires or RUN/STOP button is pressed
• Built-in diaphragm pump achieves vacuum of 7 mBar and has displacement capacity of 38 L/min. All wetted parts are PTFE or other chemical-resistant fluoropolymers
• Automatic vacuum release valve
• Built-in vacuum delay allows rotor to achieve speed before applying vacuum
• Audible alarm to signal completion of set point run time
• Acrylic lid
• Lid latch with safety sensor
• Phenol-free lid gasket
• Powder-coated aluminum chamber
• Two 177 mililiter glass traps with 1/2" OD polypropylene hose fitting for connection to vacuum tubing
• Centrifugal motion provided by a brushless motor capable of achieving up to 1725 rpm
• 300-watt heater speeds evaporation
• Brushed stainless steel and charcoal, powder-coated steel exterior with blue accents
• Vacuum port with quick disconnect fitting for 1/4" ID tubing
• Includes DNA Rotor 7462900. Accomodates up to 60 each 1.5 ml and 72 each 0.5 ml microcentrifuge tubes
• Overall dimensions: 15.1" w x 28.5" d x 11.2" h
• Actual weight 80 lbs. (36 kg). Shipping weight 100 lbs. (45 kg)

Options

• Standard voltage and frequency configurations
  • 115V, 60 Hz, 12A
  • 230V, 50/60 Hz, 6A
• Region-specific electrical plug configurations

Required Accessories

• Sample tubes

Optional Accessories

• CentriZap Strobe Light
• Rotor(s)
• Vacuum Controller
• Glass lid

Compliance

• UL Standard 61010-1 (115V, 60 Hz models)
• CAN/CSA C22.2 No. 61010-1 (115V, 60 Hz models)
• CE Conformity marking (230V, 50/60 Hz models)