Axiom Class II, Type C1 Biosafety Cabinets

The Axiom is an R&D 100 Awards for Innovation Finalist

• Omni-Flex two mode design (Type A and B mode) and two programmable working sash heights (8" and 10")
• Intrinsically-safe negative pressure design
• Fully scannable 99.99+% supply and exhaust HEPA filters (99.999% ULPA filters available)
• Long-life Dual DC Electronically Commutated Motors (ECM)
• Constant Airflow Profile (CAP) airflow monitoring system
• Active Protection Protocol that operates the cabinet's exhaust blowers for up to five minutes, in the event of exhaust system failure, preventing the flow of air into the laboratory
• Low static pressure and volumetric rate exhaust requirements when in Type B mode. No dedicated exhaust system per BSC required
• Air-Wave Entry System at access opening to enhance containment
• Contain-Air Negative Pressure Channel at top of sash to enhance containment
• MyLogic Operating System and interior-mounted, line-of-sight, full color, easy-to-understand LCD information center with:
  • Smart-Start System allows user to start up and shut down cabinet functions by raising and lowering the sash
  • Night-Smart System for idling the blower when the sash is fully closed (while in Type A mode only)
  • "Filter Life Remaining" bar graph and numeric value displayed for easy HEPA filter monitoring
  • Status line for alarm conditions and alerts to warn when filter life diminishes to 20% and 10% before alarming at 0%
  • Interval/elapsed timer for experiment monitoring
  • UV light timer (on models with UV)
  • Digital clock
  • 8 Languages
• Bright glare-free LED lighting up to 156 footcandle (1679 lux)/ Located outside the contaminated work area
• Electronic security lock (optional activation) that requires access code to operate the cabinet
• Two electrical outlets. Flush mounted stainless steel cover with dampened hinges
  • 115V GFCI, double receptacles, maximum amperage draw 5A
  • 230V, single receptacles, maximum amperage draw 3A
• 10 degree angled, fully closing sash. 1/4" tempered safety glass sash with counterbalanced, anti-racking, easy-to-lift mechanism
• Curved, stainless steel inlet grille with waterfall design and Reserve-Air Secondary Airflow Slots
• Unitized, pressure tested stainless steel interior. Glacier White epoxy-coated steel exterior
• 22.5" (57 cm) max. sash opening & 27.0" (69 cm) viewing height
• Chem-Zone work surface with dedicated direct exhaust for use with hazardous vapors or radionuclides
• Removable, type 304 stainless steel 3-piece work surface (dished Chem-Zone in center and two flat sides) with lift out knobs and clearly delineated working area (when handling chemicals)
• Touchpad on right-hand side post controls blower, light(s), timer, electrical receptacles, audible alarm mute, and menu selection
• Nominal inflow velocity of 105 fpm (0.53 m/sec)
• Nominal downflow velocity of 65 fpm (0.33 m/sec) for all 4' modfels and the 6' x 10" sash model. Nominal downflow velocity of 55 fpm (0.28 m/sec) for 6' x 8" sash models

Options

• 4' or 6' widths
• 8" or 10" nominal sash openings
• Base Stand
• 115V NA, 230V NA, 100V Japan, 230V Schuko, 230V China/Australia, 230V British (UK), or 230V India power cord and plugs
• Unassembled, NSF-approved, epoxy-coated steel, non-welded telescoping base stand with fixed leveling feet
• Accessory Package: UV lamp (254 nm), service fixture(s) with ball-type valve(s), and right-side Vacu-Pass Cord & Cable Portal
• Bag-In/Bag-Out Package: Exhaust filter for use with radionuclides or harmful chemicals

Required Accessories

• Supporting base if non-welded stand option is not selected

Optional Accessories

• Unassembled, NSF-approved, epoxy-coated steel, non-welded telescoping base stand with fixed leveling feet
• Accessory Package: UV lamp (254 nm), service fixture(s) with ball-type valve(s), and right-side Vacu-Pass Cord & Cable Portal
• Bag-In/Bag-Out Package: Exhaust filter for use with radionuclides or harmful chemicals

Compliance

• UL Standard 61010-1
• CAN/CSA 22.2 No. 61010-1
• NSF/ANSI Standard 49 listed
• CE/UKCA Mark (230V models)
• ISO Class 5 (Grade A) per ISO 14644-1
• ADA-compliant