5' Protector Premier Laboratory Hood

Attributes

Product Subcategory: General Chemistry
Nominal Width: 5'
Region: U.S. and Canada, International
Blower Requirements: Remote blower required
Conformance: ANSI Z9.5, ASHRAE 110, ASTM E84, CAN/CSA C22.2, NFPA 45, SEFA 1, UL
Enclosure Height: 59.0"
Exterior Depth: 31.7" (80.5 cm)
Lighting: T8 fluorescent
Style: Benchtop

Specifications

Estimated Shipping Weight: 410.0 lbs
Estimated Shipping Weight metric: 186.0 kg
Dimensions: 60.0" w x 31.7" d x 59.0" h
Dimensions metric: 152.4 x 80.5 x 149.9 cm
Electrical: 100-115 volts, 50/60Hz, 10 amps

Protector Premier Laboratory Hoods incorporate a sleek interior with a molded one-piece fiberglass liner, the signature feature of Labconco’s leading line of fume hoods since 1961. The one-piece liner of specially-formulated, fiberglass-reinforced polyester offers corrosion and fire resistance and easy clean up. Without seams, the interior has fewer points of deterioration for longer life.

These hoods are suitable for providing personal protection needed for general chemistry applications involving fumes and vapors. They meet the SEFA-1 standard of a low velocity, high performance hood and may be safely operated as low as 60 fpm. Choose from hoods designed to be used with a remotely-located blower or hoods that include a built-in blower — the only high performance hood with built-in blower available anywhere. Explosion-proof hoods with built-in blower are available for laboratories with potentially explosive/flammable atmospheres (Class 1 Div I or II).

SEE OUR GREEN INITIATIVES

Features (All Models)

By-pass airflow design
Eco-Foil™ Air Foil reduces energy consumption by 7-10% compared to flat air foils while its aerodynamic curve allows air to sweep the work surface for maximum containment. Clean-Sweep™ openings pull inflow air from under the air foil forcing air into non-turbulent air streams.
Cord-Keeper™ Slots on left and right side of air foil keep electrical cords out of the way
Glacier white powder-coated steel exterior is durable and corrosion-resistant
One-piece molded fiberglass liner and pre-set baffle(s) with flame spread less than 25 per ASTM E84
Tempered safety glass vertical-rising sash with powder-coated sash handle and Clean-Sweep™ openings
37.5" (95.3 cm) high sightline from the work surface to header panel allows taller users comfortable viewing while standing
Removable front and side panels, and front service access panels for access to plumbing and electrical wiring
Pre-wired LED lighting with vapor-proof design and ADA-compliant light and blower switches. Lighting rated to 50,000 hours. (Not on models with built-in explosion proof blower)
On models for use with remote blower, 12.8" ID exhaust connection(s)

Built-In Blower Models Feature

Built-in belt-driven, corrosion-resistant exhaust blower with adjustable sheave, molded thermoplastic housing and non-sparking, coated aluminum impeller
10.8" ID exhaust connection on 4' models; 12.8" ID exhaust connection on 5' and 6' models

Fixtured Models May Feature

Two pre-plumbed service fixtures with forged brass valves, lower right side with brass tubing for gas and lower left side wit copper tubing for cold water. Components for converting either or both fixtures to air and vacuum are provided. Inlet tubing is not provided.
One pre-wired GFCI electrical duplex receptacle on lower right side and, on 8' models only, one additional pre-wired GFCI electrical duplex receptacle on lower left side

Required Accessories (Not Included)

Remote blower (except for built-in blower models)
Ductwork
SpillStopper™ Work Surface
Base cabinet or stand

Optional Accessories

Service Fixture Kits (some models include service fixtures)
Electrical Duplex Kits (some models include electrical duplex)
Guardian Airflow Monitor Kits
Distillation Grid Kits
Sash Stop Kits
Ceiling Enclosures and Rear Finish Panel Kits

Webinar on Managing Lab Air with Chemical Fume Hoods
For many laboratories, managing air quality through engineered controls is essential for worker safety and comfort. However, with numerous options available for fume extraction and air purification, deciding on an engineered solution that best suits your lab’s current and future needs is not always straightforward.
Fume Hood Safety: Dos and DON'Ts
Don't be like Scooter! Learn how to safely and responsibly use your laboratory fume hood!
Fume Hoods Overview 2013
Meet Manny (ASHRAE 110 Testing)
Being an ASHRAE 110 testing mannequin is a dirty job, but some dummy's got to do it. Manny is just the guy for the job. Check out this video to get an idea of how we test our fume hoods to ensure they provide proper protection.

Resources

Login or register to download resources

En Español

Spanish-Language Fume Hoods Catalog

Campanas extractoras para laboratorios Protector y Basic

Proporciona beneficios, especificaciones y fotos.

This Spanish-language brochure contains an overview, specifications and ordering information on Protector Premier, XStream, XL and Special Application Fume Hoods, and Basic series Fume Hoods. Ordering information on accessories is also included.

View PDF (6.1 MB)

Brochures

Protector XStream, Premier and XL Laboratory Fume Hoods Brochure

This brochure contains descriptions, dimensional data and ordering information on Protector XStream, Premier and XL Laboratory Fume Hoods and SpillStopper Work Surfaces. Optional features including the Intelli-Sense Automatic Sash Position System, Chain and Sprocket, and Auto-Return Sash Systems are described. Standards related to hoods are also provided.

View PDF (6.2 MB)