Protector PVC Perchloric Acid Laboratory Hoods feature washdown systems, integral work surfaces and drainage troughs so that they may be thoroughly rinsed after each use to prevent the accumulation of potentially reactive perchloric salts. Their liners of Type 1 unplasticized polyvinyl chloride are designed to withstand reaction from perchloric acid.
Features (All Models)
By-pass airflow design and by-pass block
Powder-coated stainless steel Eco-Foil air foil with Clean-Sweep airflow openings
Glacier white, powder-coated steel exterior
Cord-Keeper slots on left and right side of air foil
Heat-welded unplasticized PVC liner (30.0" interior depth) with integral work surface, drainage trough and pre-set baffle(s). PVC withstands maximum continuous operating temperature of 140° F (60° C) and has a flame spread less than 25 per ASTM E84
Black enamel-coated hardboard supporting surface
Powder-coated aluminum sash handle with Clean-Sweep openings and Clean-Sweep slots on the powder-coated stainless steel sash tracks
3/16" thick tempered safety glass vertical-rising sash with cable and pulley, suitable for perchloric acid use
Removable front and side panels and front access panels for access to plumbing and electrical wiring
Pre-wired T8 fluorescent lighting with vapor-proof design and ADA-compliant light and blower switches
Built-in washdown system with internal piping and spray nozzles with maximum flow rate from 0.5-1.0 GPM
Washdown fitting located on top of hood to facilitate connection to external wash rings (wash rings not included)
12.75" OD PVC exhaust connection(s)
Fixtured Models May Feature
Two pre-plumbed service fixtures with forged brass valves, lower right side with brass tubing and plastic serrated hose connector for gas and lower left side with copper tubing and gray PVC rigid gooseneck faucet for cold water. Components for converting the lower right fixture to air or vacuum are provided. Inlet tubing is not provided.
One pre-wired GFCI electrical duplex receptacle on lower right side and, on 8' models only, one additional pre-wired GFCI electrical duplex receptacle on lower left side
Required Accessories (Not Included)
Dedicated remote PVC blower
Wash rings and other ductwork
Base cabinet or stand
Service Fixture Kits
Electrical Duplex Kits
Guardian Airflow Monitor Kits
Sash Stop Kits
Ceiling Enclosure and Rear Finish Panel Kits
CFR 29, Part 1910
CAN/CSA C22.2 No. 61010.1
Webinar on Managing Lab Air with Chemical Fume Hoods
For many laboratories, managing air quality through engineered controls is essential for worker safety and comfort. However, with numerous options available for fume extraction and air purification, deciding on an engineered solution that best suits your lab’s current and future needs is not always straightforward.
Fume Hood Safety: Dos and DON'Ts
Don't be like Scooter! Learn how to safely and responsibly use your laboratory fume hood!
Campanas extractoras para laboratorios Protector y Basic
Proporciona beneficios, especificaciones y fotos.
This Spanish-language brochure contains an overview, specifications and ordering information on Protector Premier, XStream, XL and Special Application Fume Hoods, and Basic series Fume Hoods. Ordering information on accessories is also included.
Installation Qualification/Operation Qualifications Protocol for Protector Series Laboratory Fume Hood
For validation of predetermined Protector Series Laboratory Fume Hood specifications. Provides a checklist of installation and operation qualifications to complete when beginning operation on new or used Protector Series Laboratory Fume Hoods.