Precise HEPA-Filtered Glove Boxes have inlet and outlet HEPA filters and provide a leak-tight physical barrier to protect the operator from hazardous airborne particulates and powders. These boxes have uses in pharmaceutical research, nanotechnology and biochemistry.

Features

One-piece molded, medium-density polyethylene shell
Dry powder epoxy-coated steel superstructure
1/4" thick laminated safety glass viewing window, 26.4" wide x 12.5" high, removable for loading equipment, with powder-coated steel frame and neoprene gasket
Space-saving inner and outer transfer chamber doors that pivot upward, are counterbalanced and equipped with quick-latches
Black, chemical-resistant work surface sealed to the glove box floor
Interior ceiling-mounted electrical duplex receptacle with 5 amp maximum circuit load
Neoprene gloves, size 9 3/4", are included
Built-in blower with speed control capable of airflow from 13 CFM to 75 CFM
Fluorescent lamp, 22 watts, with easy replacement from the top
Switches for light, blower, and innermost interior electrical receptacle
Inlet and outlet HEPA filters, 99.99% efficient on 0.3 micron particulates
Test port for challenging HEPA filter integrity
Main chamber static pressure gauge for monitoring HEPA filter loading
Approximately 13 cubic feet of interior space in main chamber
11.0" nominal ID x 12.0" long transfer chamber
Factory leak tested with a mass spectrometer while glove box is pressurized with helium at 5 inches of water gauge
No detectable leaks greater than 1 x 10-3 ml/sec
Meet Class 1 atmosphere containment conditions for oxygen leak rates per ISO 10648-2 test method
Transfer chamber interior interlocking shelf of dry powder epoxy-coated steel
0.05 ppm average tracer gas levels or less detected during perimeter scan testing (surpasses ASHRAE 110 standards)
Airborne particulate cleanliness (measured under positive and negative pressures per ISO 14644-1 test method) exceeds ISO Class 5 conditions (equivalent to Class 100) and achieved ISO Class 3 conditions (equivalent to Class 1) at both minimum and maximum operational airflow volumes
Vibration lessthan 1.5 x 10-5 inches displacement measured at the work surface at both minimum and maximum airflow volumes

Optional Accessories

Acrylic Viewing Window
Add-A-Valve Kit
Anti-Static Ionizer Fan
Balance Vibration Isolator
Blower Foot Switch
Complete Valve Set
Diaphragm Pumps
Electrical Power Strips
Exterior Transfer Chamber Shelf
External Glove Port Covers
FilterMate Portable Exhausters
Gloves and Glove Box Accessories
Hanging Shelf Accessories
Positive Pressure Conversion Kit
Recirculation Kit
Remote Blowers
Storage Shelf Kits
Trap Inserts
Waste Chute

Precise HEPA-Filtered Glove Boxes

Overview

Features

Options

Required Accessories (Not Included)

Compliance

Optional Accessories

Explore Labconco