HomeProductsDry Evaporators, Concentrators & Cold TrapsNitrogen Blow Down Dry EvaporatorsRapidVap Vertex Dry Evaporators7320037

RapidVap Vertex Dry Evaporator

Qty: Request a Quote

Catalog Number: 7320037

Key features
  • Region: International
  • Product Subcategory: N2 System with no Motion (nitrogen blow down)

Download the Product Datasheet

Login to access file!

  • Weight: 45.0 lbs
  • Weight metric: 20.0 kg
  • Dimensions: 20.4"w x 11.2"d x 13.0"h
  • Dimensions metric: 51 x 28 x 33 cm
  • Electrical: 230 volts, 50/60 Hz
  • Region: International
  • Conformance: CE
  • Product Subcategory: N2 System with no Motion (nitrogen blow down)

Using dry heat and nitrogen blow down, the RapidVap Vertex Evaporator speeds evaporation of up to 50 samples at the same time. A convenient touchpad allows easy programming of time and temperature. Up to ten different programs may be stored in the microprocessor for protocol consistency. Unlike water bath heaters, the dry block heater requires less maintenance, no distilled water or additives, and adds no potential source of contamination. The RapidVap Vertex Evaporator is ideal for preparation of samples in a variety of applications including drug discovery, clinical analysis, environmental testing, agrochemistry, and forensic evidence processing. Quality construction and reliable performance are backed by a one year warranty.

Compliance

• ETL and ETL-C listing (Domestic models)
• CE mark (International models)

Features

• Epoxy-coated steel exterior
• Glass lid
• 900 watt dry block heating system
• 50 nitrogen-dispensing nozzles in five horizontal rows of 10
• 5 nitrogen control valves with on/off switches
• Front-mounted pressure regulator with analog display of pressure from 0 to 45 psi in 2 psi increments
• LCD with touchscreen programming
• Temperature sensor probe for monitoring of block or sample temperature
• Built-in exhaust fan with blower
• On/off switch
• 6 feet (183 cm) of 2" (5 cm) ID polyethylene exhaust hose, with clamp
• 6 feet (183 cm) of flexible polyethylene tubing for nitrogen supply, with John Guest fitting.

Options

• International electrical configuration

Required Accessories

• Aluminum block
• Sample tubes
• Nitrogen source with flow rate of 6.5 CFM/185 LPM minimum (pressure not to exceed 50 psi)

Optional Accessories

• Additional aluminum blocks

 

Brochures

RapidVap Dry Evaporation Systems Catalog

Provides features and benefits, specifications, and evaporation rates of the RapidVap Vertex, RapidVap Vacuum, RapidVap N2 and RapidVap N2/48 Evaporation Systems. Accessories are also described.

Login to access file!

Videos

RapidVap Vertex Dry Evaporators

User's Manuals

ETL Authorization Mark for RapidVap Vertex Dry Evaporators

This document from Intertek authorizes the use of the ETL mark on RapidVap Vertex Dry Evaporators.

Login to access file!

RapidVap Vertex Manual

Login to access file!

Installation Qualification/Operation Qualification

RapidVap Vertex Evaporation Systems IQ/OQ Protocol Installation Qualification/Operation Qualification

This Qualification Protocol is written to assist the end-user in validation of predetermined specifications. The protocol begins with planning the site for the piece of equipment and therefore is of value prior to receipt of product.

Models: RapidVaps

7320020 7320030 7320035 7320037 7320040

View PDF (35.2 KB)

Declarations of Conformity

CE Declaration of Conformity - RapidVap Vertex Dry Evaporator

Declaration of Conformity for applicable models of the RapidVap Vertex Dry Evaporator

View PDF (308.9 KB)

Application Notes

RapidVap Vertex Dry Evaporator Application Notes

Describes the method of using the RapidVap Vertex per US EPA Method 8270, US EPA Method 550.1 and US FDA LIB No.# 4438.

Login to access file!Login to access file!
Categories
Aluminum Blocks

Dry Evaporator, Concentrator & Cold Trap Accessories

From blocks to rotors to strobe lights, numerous accessories are available to customize your Labconco dry evaporator or vacuum concentrator.

Products & Model Lines