Practical Approach To Laboratory Design
Tuesday, May 13 & Wednesday, May 14
Two Days of Information-Packed Sessions for Individuals Involved in Laboratory Planning
Before you start your next laboratory design project, learn the essentials on laboratory planning and execution from experts in the field.
AIA Accredited
The Practical Approach to Laboratory Design Seminar provides 12 AIA-accredited learning units that qualify as Health, Safety and Welfare units - an entire year's requirement in one seminar.
Overview
The focus for this year’s seminar is exploring current design trends for interdisciplinary laboratories. In interactive sessions, topics of emphasis will include:
• Biocontainment
• Green Design
• Nanotechnology
• Forensic Science
• Vivariums
 |
Michael A. Schaadt, AIA Mike Schaadt is a Principal with PGAV Architects, a leading science research and education architecture and planning firm. He has been leading the design of science research and education facilities for 20 years. His design experience encompasses a diverse range of project types and a continuous exploration of emerging trends in interdisciplinary research and academic science education. Mike is a graduate of the University of Kansas. Recent notable projects include work at Midwest Research Institute, The University of Oklahoma’s Stephenson Life Science Research Center, Kansas State University’s Biosecurity Research Institute, The Stowers Institute for Medical Research and The University of Missouri’s new Regional Biocontainment Laboratory. |
 |
Steve Helgren , Associate AIA Steve Helgren is a Project Manager and Laboratory Designer with PGAV Architects, specializing in the programming, planning and design of complex science and research facilities. He leads PGAV’s science and technology studio in the exploration and integration of emerging trends and technologies in the laboratory environment. Helgren is a graduate of the University of Nebraska, and has been with PGAV for 11 years. His recent projects include ongoing work at the Stowers Institute for Medical Research, BioMed Valley Discoveries, Ameripath Laboratories, Midwest Research Institute, The University of Oklahoma’s Stephenson Life Science Research Center, Kansas State University’s Biosecurity Research Institute and a Research Incubator for the Kansas University Medical Center. |
 |
Joe Phillips, AIA With more than 30 years of experience and a unique background as both a scientist and an architect, Joe Phillips is the leading independent planner of mission-critical capital projects for science and technology. He has led a wide variety of projects in sectors including biotechnology, forensic science, universities, pharmaceutical research, and health sciences. His focus is advanced technology for laboratory facilities. He serves on the Board of Directors of the International Institute for Sustainable Laboratories and the US Green Building Council’s Core Committee for the Application Guide for Laboratories. He is a published author and frequent presenter on the future of lab design. |
 |
Kenneth C. Mohr, Jr. Ken Mohr is a Principal and Senior Lab Planner for Crime Lab Design, a comprehensive source for planning and design of forensic science facilities. His 20 years experience in planning and designing technically advanced laboratories and related support spaces includes nearly 4 million square feet of forensic facilities. He brings specialized knowledge and expertise in all the functional elements of forensic initiatives such as DNA and trace evidence, toxicology, analytical chemistry, histology, teaching labs, computer forensics, quality control, evidence management, autopsy, pathology, International ASCLD standards for lab accreditation, biocontainment, and regulatory requirements. |
 |
Susan Halla-Borrelli Susan Halla-Borrelli is a Laboratory Planner and Project Manager with Crime Lab Design. Her experience includes all phases of project development from schematic design through construction documents and construction administration. She masterfully communicates the unique design challenges of forensic laboratories and is a published author in Forensic Magazine. |
 |
Randall E. Larsen Randy Larsen is President of The FWA Group, an architecture firm specializing in the sustainable design of research and educational facilities. Since 1979, Randy has specialized in laboratory and R&D facilities throughout the U.S. and Canada. His work is concentrated in higher education, health science centers, and the biopharmaceutical industry. Currently, Randy is involved with two laboratory projects at Colorado State University (CSU). Both projects, a new Diagnostic Medicine Center for the Veterinary Teaching Hospital, and a new Research Innovation Center were awarded to The FWA Group as a result of winning design competitions as part of the selection process. His recently completed project, the Rocky Mountain Regional Biocontainment Laboratory at CSU, is one of 13 across the country funded by the National Institute of Allergy and Infectious Diseases as part of the anti-terrorism initiatives of the Federal Government. |
 |
Gregory S. Lattig, AIA Greg Lattig is a Senior Principal for The Clark Enerson Partners, a firm offering all design disciplines in-house, with an emphasis on science and medicine facilities. With over 30 years of experience, Greg Lattig is considered to be one of the region’s foremost experts in research and laboratory planning, programming and design. Greg makes a personal commitment on each and every project he is involved in and is deeply involved in every phase of work. He does not believe in handing off managerial or decision making responsibility that affects the successful completion of the project. To Greg, commitment means investing whatever time is necessary to collaborate, guide and nurture user groups to develop creative and practical solutions to each challenge. |
 |
Timothy J. Reynolds, PE Tim Reynolds has more than 20 years of experience in the field of electrical engineering and engineering project management. He understands the functional requirements of laboratory facilities from not only a research standpoint, but also as it relates to power distribution and lighting. He participates in all facets of laboratory projects including grant preparation, programming, and design. Tim has a unique ability to work closely with laboratory personnel, to understand laboratory processes and key design challenges, and to develop creative design solutions that satisfy all project goals and objectives. |
 |
Shawn Diederich, PE, LEED® AP Shawn Diederich has a reputation for developing thorough, accurate and creative mechanical engineering solutions for science and laboratory challenges. Clients and contractors consistently give positive feedback regarding the high quality of his work. Shawn has been instrumental in the design of one-of-a-kind research facilities with sophisticated, custom-designed mechanical systems. And as a LEED-accredited professional, he works to bring sustainable technologies and ultra-efficient systems into the building design. |
 |
Rick Wise, AIA, LEED® AP With more than 15 years of experience, Rick Wise has worked on many teaching and research laboratory projects. His forte lies in his attention to detail, whether it is writing project specifications, managing phasing options, or providing cost estimates. He brings a multifaceted perspective to the project team by virtue of his previous background as a facilities project manager. His "owner" mentality proves invaluable when it comes to understanding project staging and maintaining project schedules. And as a LEED-accredited professional, he incorporates sustainable technologies into the building design. |
Location
The seminar will be held at Labconco Corporation's headquarters in Kansas City, Missouri, which is within a short driving distance of several area hotels. Labconco's auditorium features comfortable seating, fully functional laboratory equipment on display and extensive audio-visual equipment. Part of the seminar's agenda will include fume hood demonstrations in Labconco's airflow testing laboratory, a 500 square foot facility where laboratory conditions can be replicated and ventilation scenarios simulated.
Registration Fee
Early registration fee is $275 but will increase to $300 after April 25.
Confirmation
After receiving your registration form and payment or purchase order, we will mail you a letter confirming enrollment, information on nearby hotels, an area map and transportation information.
Cancellation Policy
Cancellations are accepted and fee fully refunded when notification is provided
at least 7 days before the session. A 50% refund will be made for cancellations
within 7 days of the seminar date.