|| Products  >> Glove Boxes  >> Protector Multi-Hazard Glove Boxes

Protector Multi-Hazard Glove Boxes

Protector Multi-Hazard Glove Boxes provide a physical barrier to protect the user from hazardous materials such as low level radioisotopes and carcinogens.

Share
Filter Reminder Service Filter Reminder Service

Get an email reminder to check or change your filters! Set up reminder now.

Protector Fiberglass Multi-Hazard Glove Box
Catalog # Summary
5065000 Domestic Electrical Requirements
5065002 International Electrical Requirements

Protector Stainless Steel Multi-Hazard Glove Box
Catalog # Summary
5065500 Domestic Electrical Requirements
5065502 International Electrical Requirements

Protector Stainless Steel Double Multi-Hazard Glove Box
Catalog # Summary
5065520 Domestic Electrical Requirements
5065522 International Electrical Requirements
Protector Glove Boxes Catalog Contains specifications, dimensional drawings and ordering information on Labconco's line of Protector Controlled Atmosphere and Multi-Hazard Glove Boxes.
download PDF (Login Required)
Precise Glove Boxes Catalog Contains specifications, dimensional drawings and ordering information on Labconco's line of Precise Glove Boxes and XPert Weigh Boxes.
download PDF (Login Required)
Precise Glove Box Overview Presentation Provides general information on Precise Basic, Controlled Atmosphere and HEPA-Filtered Glove Boxes and XPert Weigh Box Glove Boxes. Answers basic questions and discusses the features and benefits of Precise Glove Boxes. Also addresses accessories available and market applications for Precise Glove Boxes.
download PDF (Login Required)
Protector Glove Box Overview Presentation Provides general information on Protector Controlled Atmosphere, Multi-Hazard and Combination Glove Boxes. Answers basic questions and discusses the features and benefits of Protector Glove Boxes. Also addresses accessories, market applications and the American Glove Box Society.
download PDF (Login Required)
Glove Box Viewing Window and Gasket Replacement Instructions Outlines the replacement procedure for the viewing window and gaskets on all Labconco glove boxes.
download PDF (Login Required)
HEPA Filter Replacement Instructions Contains instructions for replacing the Multi-Hazard Glove Box HEPA filter.
download PDF (Login Required)
Protector Multi-Hazard Glove Box Manual For catalog numbers:5065000, 5065002, 5065500, 5065502
download PDF (Login Required)
How It Works: High Containment at Low Cost Lab Manager, September 2007 article describes why the Precise Glove Box makes sense for laboratories with a tight budget.
download PDF (Login Required)
Just how precise is the Precise Glove Box?
download HTML
download PDF (Login Required)

Features

• Laminated safety glass viewing window with one-piece, molded neoprene gasket seal
• Two interior electrical receptacles separately controlled by individual switches on the front panel
• Neoprene gloves, size 9 3/4", are included.
• Comfortable, 8" diameter glove ports
• 30-watt fluorescent lamp provides interior lighting.
• Epoxy-coated steel exterior
• Large transfer chamber allows easy transfer of materials between the laboratory and box while maintaining an established glove box environment.
• Space-saving inner and outer transfer chamber doors
• High efficiency polyester prefilter lengthens the life of the inlet HEPA filter by trapping large particles.
• Inlet and outlet HEPA filter, 99.99% efficient on particulates 0.3 micron in diameter, prevent contaminants from entering or leaving the glove box chamber.
• Built-in blower with blower speed control permits the box's interior atmosphere to be vented to the outside.
• 3” square collar allows connection to ducting system.
• Pressure differential gauge enables the user to monitor glove box pressures and inlet HEPA filter loading.
• Control switches for the fluorescent lamp and interior electrical receptacles are conveniently located on the control panel.
• ETL listed (115 volt models)
• CE Conformity (230 volt models)

Options

• Chemical resistant, one-piece molded fiberglass or stainless steel liner
• International electrical configuration
• Protector Stainless Steel Double Multi-Hazard Glove Boxes have 81.84" of interior working width and four glove ports.
• Factory-installed transfer tray for easy loading into the glove box. Contact Labconco for ordering information.
• Factory-installed polycarbonate viewing window. Contact Labconco for ordering information.
• Factory-installed mini transfer chamber for transferring small items into the box. Contact Labconco for ordering information.

Required Accessories

• Adjustable Height Base Stands

Optional Accessories

• Carbon Exhaust Filter
• Drying Trains
• Gloves and Glove Box Accessories
• HEPA Inlet or Exhaust Filter
• Interior Shelves